Miniflex 8.4LX with built-in Heater
The Miniflex 8.4LX is designed for operators who prefer a compact extractor with built-in heater. The Miniflex 8.4LX is very small compared to most professional carpet cleaning machines and measures just 39cm (w) x 66cm (l) x 86cm (h). This compact design makes the Miniflex 8.4LX especially easy to work with and transport:
- Built-in ‘instant’ Magma heater (adjustable)
- Virtually instant very hot water direct from cold water in the tank
- 8.4” high efficiency Lamb Ametek vacuum motor system
- Choice of water pumps from 130 to 400psi
- Professional cleaning results, drying times and hose runs up to 100ft!
- Compact user-friendly design (measures just 39cm (w) x 66cm (l) x 86cm (h))
- Loading wheels for easy van loading/unloading
- Built-in auto-feed
- Built-in power pre-spray
- Easy access servicing
- Optional silencer for whisper quiet operation
Great 8.4″ vac motor suction
Lamb Ametek’s High Efficiency 8.4 vac motor gives you approximately the same vacuum power as 2 x 5.7” Lamb Ametek 1200 watt motors. This gives you professional cleaning results, drying times and powers up to 100ft hose runs.
Miniflex 8.4LX pump options
- 130psi Shurflo pump
- 220psi Aquatec pump (adjustable with pressure gauge)
- 400psi Pumptec pump (adjustable with pressure gauge)
The 130psi Shurflo pump is lightweight and delivers professional results. The 220psi is adjustable, more durable and cleans a little faster. For maximum speed and efficiency choose the 400psi Pumptec pump, which is also fully adjustable. The 220 and 400psi pumps are both fully adjustable and with a pressure gauge on the switch panel.
Built-in Magma heater
The Miniflex 8.4LX has a Magma heater built-in to the machine’s motor housing. This gives you virtually instant very hot water, direct from stone cold water in the tank, with no pre-heating or secondary heater needed.
Just turn the Magma on, wait about 90 seconds for the Magma to heat up and start cleaning. You now have a constant supply of hot water at the wand when carpet cleaning. There’s a temperature dial so you can reduce the temperature when cleaning heat-sensitive fibres.
Van easy-loading system
The Miniflex 8.4LX is super-easy to load in and out the van. Just tilt the machine back onto the loading wheels and roll it in. The van takes half the weight of the machine when loading. It’s all very easy and you won’t need to install a ramp to get this machine in and out your van.
Whisper quiet operation
Add the optional exhaust silencer and you have one of the quietest professional extractors on the market. With the exhaust silencer attached, you can stand right next to the Miniflex 8.4LX and talk without needing to raise your voice – which is very quiet indeed for a professional carpet cleaning machine!
The Miniflex 8.4LX comes with built-in auto-feed system. Simply remove the feed hose from the solution tank and drop it into any external tank or container. The Miniflex 8.4LX then draws solution from where-ever the feed hose is placed – so you can easily hook the machine up to external water tanks.
Pre-spray delivery System
Drop the auto-feed hose into a container of pre-mixed pre-spray and you can use the Miniflex 8.4LX to apply pre-spray through your wand or hand tool. This can save a lot of time when pre-spraying larger areas.
Easy servicing with National Repair Network
The Miniflex 8.4LX has been designed for quick and easy maintenance. The motor housing can be accessed in just a few seconds. A vac motor can be changed in as little as 10 minutes. The pump is also very easy to swap out and can be changed in around 15 minutes.
Miniflex 8.4LX Commercial Warranty
The Miniflex 8.4LX comes with a 5 year guarantee on the machine body. All other parts are covered by a 1 year commercial warranty. Servicing and repairs can be carried out at MP Repair Services.
Miniflex LX Specifications
|Solution tank||25 litres|
|Recovery tank||Airflow friendly cylindrical design|
|Motor housing||Easy access for maintenance with fold-out motors and quick release system. Fan cooled for maximum component longevity|
|Pump options||130psi Shurflo pump fixed pressure
220psi Aquatec adjustable with pressure gauge
400psi Pumptec adjustable with pressure gauge
|Vacuum system||Big Airflow System with big bore internal plumbing|
|Vacuum motors||2 x 3-stage Lamb Ametek vacuum motors|
|Vac hose port||2″ port accepts 1.5″ and 2″ vac hose|
|Exhaust||Optional 4″ big bore|
|Easy load system||No need to lift machine into van|
|Built-in power sprayer||Apply pre-spray via hand tool or wand|
|Direct feed||Can connect to external water tank with no extra pump needed|
|Tank construction||Tough polyethylene|
|Control panel||Top mounted for convenience|
|Rear wheels||10″ non marking for easier stair climbing|
|Front wheels||Both with locking brake|
|Vacuum shut-off||Ball float valve shut-off|
|Power cable||25ft high visibility orange cables|
|Dimensions (cm)||39cm (W) x 66cm (L) x 86cm (H)|
|Weight||130psi = 32kg, 220psi = 34kg, 400psi = 38kg|
|Inline heater||Optional Magma Inline ‘Instant’ Heater|
|Warranty||5 years casing, 1 year parts|